NT Labs Koi Care Chloramine T is used when fish show symptoms of:

• Bacterial infection (ulcers, fin, tail or mouth rot, loose scales),
• Parasitic infection (Costia, Trichodina, skin or gill flukes), flicking and rubbing against rough surfaces or gasping.

Product Information:

• Recommended for: all koi ponds.
• Do not use with Orfe, Rudd, Tench or Sturgeon/Sterlet.
• Treatment type: powder, mix with a bucket of pond water before adding to your pond.
• Active Ingredients: Chloramine T.

Dosage & total treatment volume:

• Read instructions carefully before use.
• For bacterial infections, use 10g per 4546 litres (1000 gallons).
• For parasitic infections, use 20g per 4546 litres (1000 gallons).

440g treats:

• Bacterial infections up to 66,675 litres (14,667 gallons).
• Parasitic infections up to 25,500 litres (5,500 gallons).

Usage tips:

• Check your pond water quality before use (for ammonia, nitrite, pH etc).
• Remove any adsorbent filter media such as carbon or phosphate remover before use (these may remove all or part of the treatment).
• Turn off UV filtration (if used) until 48 hours after the final dose.
• Increase aeration during treatment.
• Do not use if the pH is below 7, the carbonate hardness (KH) is below 6°dH and/or the general hardness (GH) is below 6°dH.
• Do not use when the water temperature is below 10°c.
• Do not use in hot, humid, and thundery weather.
• Do not mix with other medications.